See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Front-side view
Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line 1 shows the front part of the v ...

Unlocking doors
1. Press the button on the Intelligent Key. 2. The hazard warning lights flash once. 3. Press the button again within 5 seconds to unlock all doors. All doors will be locked automatically ...