Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the call has ended, press the 
button
on the steering wheel.
NOTE:
If you do not wish to take the call when you
hear the ring tone, press the
button
on the steering wheel.
For additional command options, see “List of voice commands” later in this section.
See also:
Jump starting
If jump starting is necessary, see Jump starting
in the In case of emergency section of this
manual. If the engine does not start by jump
starting, the battery may have to be replaced.
Contact ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is ...
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with All-Wheel Drive (AWD)
should never be tested using a two wheel
dynamometer (such as the dynamometers used
by some states for emissions testing), or similar
equipment. M ...