Blocking wheels
Blocking wheels
Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire 2 to prevent the vehicle from moving when it is jacked up.
Be sure to block the wheel as the vehicle may move and result in personal injury.
See also:
Connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
1. Press the button on the ...
Jump starting
If jump starting is necessary, see “Jump starting”
in the “In case of emergency” section of this
manual. If the engine does not start by jump
starting, the battery may have to be replace ...
Shifting
To move the selector lever,
Push the button A while
depressing the
brake pedal.
Push the button.
Just move the selector lever.
After starting the engine, fully depress the brake
pedal, ...