Emission control information label

The emission control information label is attached

The emission control information label is attached to the underside of the hood as shown.

    See also:

    Installing covers to rear parcel shelf
    CAUTION Make sure that the hinge is completely aligned with the pin. If the pin is forced into position, it may break. Install the top tether anchor cover or key cylinder cover as follows: 1. ...

    Explanation of general maintenance items
    Additional information on the following items with “ * ”is found later in this section. ...

    NISSAN Intelligent Key™
    Replace the battery in the Intelligent Key as follows: 1. Remove the mechanical key from the Intelligent Key. 2. Insert a small screwdriver A into the slit B of the corner and twist it to separa ...