Lift gate
- Always be sure the lift gate has been closed securely to prevent it from opening while driving.
- Do not drive with the lift gate open.
This could allow dangerous exhaust gases to be drawn into the vehicle.
See “Exhaust gas (carbon monoxide)” in the “5. Starting and driving” section of this manual.
- Make sure that all passengers have their hands, etc. inside the vehicle before closing the lift gate.
Lift gate
To open the lift gate, unlock it and push the opener switch A . Pull up the lift gate to open.
The lift gate can be unlocked by:
- pushing the unlock button 
on the
keyfob or the Intelligent Key (if so equipped)
twice.
- pushing the lift gate request switch (if so equipped).
- pushing the power door lock switch to the unlock position.
- inserting the key into the driver’s door key cylinder and turning it to the rear of the vehicle twice.
To close the lift gate, pull down until it securely locks.
See also:
Audio main operation
Place the ignition switch in the ACC or ON
position. Then, push the button repeatedly
to switch to the iPod® mode.
If the system has been turned off while the iPod®
was playing, pushing the O ...
Silencing the horn beep feature
Silencing the horn beep feature
If desired, the horn beep feature can be deactivated
using the Intelligent Key.
To deactivate: Press and hold the
and
buttons for at least 2 seconds.
The h ...
Power outlet
Instrument panel
Center console (if so equipped)
The power outlet is located in the instrument
panel and the center console (if so equipped).
- The outlet and plug may be hot
during o ...