Activating Around View Monitor

Selector lever operation:

- When the selector lever is shifted into the “R” (Reverse) position (1 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the rear view/bird’s-eye view screen B is displayed.

The screen B switches back to screenA when the selector lever is shifted out of the “R” (Reverse) position (2 ).

CAMERA button operation:

- When the CAMERA button is pushed (8 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the front view/ bird’s-eye view screen D is displayed.

    See also:

    Programming HomeLink
    1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light (1) blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand ...

    Brakes
    If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. ...

    Most common factors contributing to vehicle corrosion
    ● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coatings caused by gravel and stone c ...