Key positions
LOCK (0)
Except for the Intelligent Key equipped model:
The key can only be removed from the ignition switch at this position.
For the Intelligent Key equipped model:
PUSH OFF -
The ignition switch is locked at this position.
PUSH ON -
The ignition switch will be unlocked while carrying the Intelligent Key.
OFF
The power supply is turned off.
ACC
The electrical accessory power activates without the engine turned on.
ON (3)
The ignition system and the electrical accessory power activate without the engine turned on.
START (4)
The engine starter activates and the engine will start. The ignition switch, when released, will automatically turn to the ON position.
As soon as the engine has started, release the ignition switch immediately.
See also:
Tire Pressure Monitoring System (TPMS) (if so
equipped)
Each tire, including the spare (if provided),
should be checked monthly when cold and inflated
to the inflation pressure recommended by
the vehicle manufacturer on the vehicle placard
or tire ...
Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the vehicle
body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside
the vehicle and should be removed for dry ...
Underbody
In areas where road salt is used in winter, it is
necessary to clean the underbody regularly in
order to prevent dirt and salt from building up and
causing the acceleration of corrosion on the u ...