Two-Wheel Drive (2WD) models

Two-Wheel Drive (2WD) models
Two-Wheel Drive (2WD) models

NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.

- Never tow Continuously Variable

- Never tow Continuously Variable Transmission (CVT) models with the front wheels on the ground or four wheels on the ground (forward or backward), as this may cause serious and expensive damage to the transmission. If it is necessary to tow the vehicle with the rear wheels raised, always use towing dollies under the front wheels.

- When towing CVT models with the front wheels on towing dollies:
— Turn the ignition switch to the OFF position, and secure the steering wheel in a straightahead position with a rope or similar device.

— Move the selector lever to the N (Neutral) position.

- When towing a CVT model with the rear wheels on the ground (if you do not use towing dollies): Always release the parking brake.

    See also:

    NISSAN Intelligent Key™ door buzzer
    The Intelligent Key door buzzer sounds if the Intelligent Key is left inside the vehicle when locking the doors. When the buzzer sounds, be sure to check both the vehicle and the Intelligent Key. ...

    Exterior design
    First revealed as the Qazana show car - unveiled at the 2009 Geneva Motor Show - Juke was created at the London-based Nissan Design Europe and refined at Nissan's Design Centre (NDC) in Japan. Qas ...

    Adjusting the screen (models with Navigation System)
    Adjusting the screen (models with Navigation System) To adjust the quality of the screen, perform the following. 1. Press the SETUP button. 2. Touch “System”. 3. Touch “Display”. 4. ...