Temperature

A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated.

    See also:

    Heater operation
    Heating: This mode is used to direct heated air to the foot outlets. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control ...

    Audible reminder and warning when locking the doors
    When the chime or buzzer sounds from inside and outside the vehicle, check for the following. ● The ignition switch is placed in the LOCK position. ● The Intelligent Key is not left ...

    Power steering fluid
    The fluid level should be checked using the HOT MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the powe ...