Automatic operation (if so equipped)

Tilt operation
Tilt operation

Push the switch (1) up or down to adjust the steering wheel to the desired position.

Entry/Exit function

The automatic drive positioner system will make the steering wheel move up automatically when the drivers door is opened and the ignition switch is in the LOCK position. This lets the driver get into and out of the seat more easily. The steering wheel moves back into position when the drivers door is closed and the ignition switch is pushed.

For more information, see Automatic drive positioner in this section.

Telescopic operation

Push the switch (1) forward or backward to adjust the steering wheel to the desired position.

    See also:

    Supplemental air bag warning light
    When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. I ...

    Front-side view
    Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line 1 shows the front part of the v ...

    Locking doors
    Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...