Controls
Automatic control button
Push the AUTO button to activate the automatic climate control system for the passenger compartment.
Fan control button
Push the
button to manually
control the fan
speed for the passenger compartment.
- The fan speed increases each time
the
button is pushed.
- When the
button is pushed
while on
the maximum fan speed, the speed changes
to the lowest fan speed.
- Push the AUTO button to return to the automatic control of the fan speed.
Temperature control switch
Push the
button or to raise
lower the desired temperature for the passenger
compartment. Changing the temperature with
the rear seat controls will activate the DUAL
mode on the main climate controls.
See also:
Vehicle Dynamic Control (VDC) OFF switch
The vehicle should be driven with the Vehicle
Dynamic Control (VDC) system on for most driving
conditions.
If the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to ...
Uniform tire quality grading
DOT (Department of Transportation) Quality
Grades: All passenger car tires must conform to
federal safety requirements in addition to these
grades.
Quality grades can be found where applicable ...
Starting the engine
1. Apply the parking brake.
2. Move the selector lever to the P (Park) or N
(Neutral) position. (P is recommended.)
The starter is designed so that it does not
operate unless the selector lever ...
