Before starting

To get the best recognition performance from Voice Recognition, observe the following:

- The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.

- Wait until the tone sounds before speaking a command.

- Speak in a natural conversational voice without pausing between words.

- If the air conditioner is set to Auto, the fan speed is automatically lowered so that your commands can be recognized more easily.

    See also:

    Top tether anchor point locations
    Top tether anchor point locations Anchor points are located on the floor behind the outboard and center seating positions. The child restraint top tether strap must be used when installing chi ...

    Air cleaner
    Push the tabs 1 and pull out the filter element 2 . The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mai ...

    Forward-facing child restraint installation using the seat belts
    WARNING: The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not be ...