Type A and Type B
Type A-Without compass
Type B-With compass
The indicator light 2 will illuminate when the automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press:
● the O button for inside mirrors without compass.
● the 
button for inside mirrors
with
compass.
The indicator light will turn off.
To turn on the automatic anti-glare feature again, press:
● the 
button for inside mirrors
without
compass.
● the 
button for inside mirrors
with
compass.
The indicator light will turn on. For information on HomeLink Universal Transceiver operation, see the “HomeLink Universal Transceiver” in the “Instruments and controls” section of this manual.
For information on the compass display (if so equipped), see “Compass display” in the “Instruments and controls” section of this manual.
See also:
Vehicle Dynamic Control (VDC) system (if so
equipped)
The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and vehicle
motion. Under certain driving conditions,
the VDC System helps to perform the following
funct ...
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with All-Wheel Drive (AWD)
should never be tested using a two wheel
dynamometer (such as the dynamometers used
by some states for emissions testing), or similar
equipment. M ...
Warning lights
Anti-lock Braking
System (ABS)
warning light
When the ignition switch is placed in the ON
position, the Anti-lock Braking System (ABS)
warning light illuminates and then turns off. This
...