Dehumidified heating

This mode is used to heat and dehumidify the air.
1. Press the position. button to the OFF position.
2. Press the button. air flow control button.
3. Turn the fan control dial to the desired position.
4. Push the button. The indicator light comes on.
5. Turn the temperature control dial to the desired position.

    See also:

    Reprogramming a single HomeLink button
    To reprogram a HomeLink Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink button. Do not release the button until step 4 has been completed. 2. When the ...

    Making a call
    To make a call, follow the procedure below: 1. Press the button on the steering wheel. The “Phone” screen will appear on the display. 2. Select one of the following options to make a call: ...

    Keyfob (if so equipped)
    Keyfob (if so equipped) Replace the battery in the keyfob as follows. 1 Open the lid using a coin A . 2 Remove the battery B . 3 Install a new battery C with the “+” facing down. ● ...