During a call

There are some options available during a call. Select one of the following displayed on the screen, if necessary:
Hang up:
Finish the call.
Use Handset:
Transfer the call to the cellular phone.
Mute:
Mute your voice to the person.
Keypad:
Brings up a keypad; enter digits when needed. For example, entering your PIN number for voicemail.
NOTE:
Pushing the TALK
switch on the
steering wheel during a call allows numbers
and digits to be sent using Voice Recognition.
Cancel Mute:
This will appear after the “Mute” key is selected. Mute will be cancelled.
Switch Call:
Select “Switch Call” to answer another incoming call. By selecting “Hang Up,” you can end a call and can speak to a caller who is on hold again.
● This function may not be useable, depending on the model of phone.
To adjust the person’s voice to be louder or quieter, press the volume control switch located on the steering wheel switches or turn the volume control knob on the instrument panel while talking on the phone. This adjustment is also available in the SETTING mode.
See also:
iPod Player Operation without Navigation System (if so equipped)
Connecting iPodT
To connect an iPodT to the vehicle so that the
iPodT can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open ...
Troubleshooting guide
The system should respond correctly to all voice
commands without difficulty. If problems are encountered,
try the following solutions.
Where the solutions are listed by number, try
each soluti ...
Locking doors
1. Place the ignition switch in the LOCK position.
2. Close all doors.
3. Press the button on the
Intelligent
Key.
4. The hazard warning lights flash twice and
the horn beeps once.
5. All d ...
