Break-in schedule

CAUTION

During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.

● Avoid driving for long periods at constant speed, either fast or slow, and do not run the engine over 4,000 rpm.

● Do not accelerate at full throttle in any gear.

● Avoid quick starts.

● Avoid hard braking as much as possible.

● Do not tow a trailer for the first 500 miles (800 km). Your engine, axle or other parts could be damaged.

    See also:

    Connecting procedure
    NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Press the button on t ...

    Continuously Variable Transmission (CVT) fluid
    - Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. - Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by th ...

    Under the Hood
    A 3.5-liter V-6 engine sends 245 horsepower to Nissan’s Xtronic CVT, which has no gears but works with a steel belt and twin pulleys. An available Vehicle Dynamic Control system improves stabili ...