Aluminum alloy wheels (if so equipped)

Wash the wheels regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. If not removed, road salt can discolor the wheels.

CAUTION

Follow the directions below to avoid staining or discoloring the wheels:

● Do not use a cleaner that uses strong acid or alkali contents to clean the wheels.

● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature.

● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied.

    See also:

    Rear-facing child restraint installation using LATCH
    Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. Follow these steps to install a rear-facing child restraint ...

    Installing top tether strap
    First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. Flip up the anchor cover 1 from the anchor point which i ...

    LATCH lower anchor location
    LATCH lower anchor location The LATCH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH anchors. ...