Controls
Outside air circulation:
Push the air recirculation button to turn off the indicator light on the button. The air flow is drawn from outside the vehicle.
Air recirculation:
Push the air recirculation button to turn on the indicator light on the button. The air flow is circulated inside the vehicle.
Air flow control:
Turn the air flow control dial to change the air flow mode.
— Air flows from the center and side ventilators with maximum cooling (air conditioning).
(The air recirculation and A/C will be automatically turned on.) — Air flows from the center and side ventilators.
— Air flows from the center and side ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster and foot outlets.
— Air flows mainly from the defroster outlets.
- You can also select the middle position between and or between and .
- When the , or position is selected, the air recirculation mode cannot be turned on to prevent the windows from being fogged up.
Fan speed control:
Turn the fan speed control dial clockwise (HI) to increase the fan speed.
Turn the fan speed control dial counterclockwise (LO) to decrease the fan speed.
A/C (Air Conditioner) operation:
Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates.
Temperature control:
Turn the temperature control dial to set the desired temperature. Turn the dial between the middle and the right position to select the hot temperature. Turn the dial between the middle and the left position to select the cool temperature.
See also:
Ignition switch
● Never remove or turn the key to the
LOCK position while driving. The steering
wheel will lock (for models with a
steering lock mechanism). This may
cause the driver to lose control ...
Initialization
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
which takes a few seconds. If the button is
pressed before the initialization completes, the
sy ...
Switch operation
The windshield wiper and washer switch operates
when the ignition switch is placed in the ON
position.
Push the lever down to operate the wiper at the
following speed:
1 Intermittent — interm ...