Washing

Wash dirt off the vehicle with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (never hot) water.

- Do not use car washes that use acid

- Do not use car washes that use acid in the detergent. Some car washes, especially brushless ones, use some acid for cleaning. The acid may react with some plastic vehicle components, causing them to crack. This could affect their appearance, and also could cause them not to function properly. Always check with your car wash to confirm that acid is not used.

- Do not wash the vehicle with strong household soap, strong chemical detergents, gasoline or solvents.

- Do not wash the vehicle in direct sunlight or while the vehicle body is hot, as the surface may become water-spotted.

- Avoid using tight-napped or rough cloths, such as washing mitts. Care must be taken when removing caked-on dirt or other foreign substances so the paint surface is not scratched or damaged.

Rinse the vehicle thoroughly with plenty of clean water.

Inside flanges, seams and folds on the doors, hatches and hood are particularly vulnerable to the effects of road salt. Therefore, these areas must be regularly cleaned. Take care that the drain holes in the lower edge of the door are open. Spray water under the body and in the wheel wells to loosen the dirt and wash away road salt.

Avoid leaving water spots on the paint surface by using a damp chamois to dry the vehicle.

    See also:

    Console light (if so equipped)
    The console light will turn on whenever the parking lights or headlights are illuminated. The console light brightness can be adjusted with the instrument brightness control. ...

    Continuously Variable Transmission (CVT) fluid
    CAUTION: - Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. - Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered ...

    Shifting
    After starting the engine, fully depress the brake pedal and move the shift selector from P (Park) to any of the desired shift positions. Apply the parking brake if the shift selector is in ...