Manual Control (if so equipped)
While using the voice recognition system, it is
possible to select menu options by using the
steering wheel controls instead of speaking voice
commands. The manual control mode does not
allow dialing a phone number by digits. The user
may select an entry from the Phonebook or Recent
Calls lists. To re-activate voice recognition,
exit the manual control mode by pressing and
holding the PHONE/END (
)
button. At that
time, pressing the PHONE/SEND (
) button
will start the Hands Free Phone System.
Operating tips
- To enter manual control mode, start the
voice recognition system and tilt the tuning
( 
) switch up or down. The
system will
speak "Showing Manual Option" when
manual controls are initially activated.
- To browse the menu options, tilt the tuning
( 
) switch up or down. The
system will
always speak the current menu option. Depending
on the audio display, it will also
show the current menu option.
- To select the current menu option, press the
PHONE/SEND ( ) button.
- To go back to the previous menu, press the
PHONE/END ( ) button. If the
current
menu is the Main Menu, pressing the
PHONE/END ( ) button will exit the
Phone system.
- To exit the manual control mode, press and
hold the PHONE/END ( ) button
for 5
seconds.
See also:
Instrument panel
Instrument panel
1. Side and center vents.
2. Headlight/fog light (if so equipped)/turn
signal switch.
3. Steering wheel switch for audio control
and Bluetooth Hands-Free Phone
System.
4. ...
Car phone and CB radio
When installing a car phone or a CB radio in
your vehicle, be sure to observe the following
cautions, otherwise the new equipment may
adversely affect the electronic control modules
and electr ...
Windshield wiper blades. Cleaning
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Clean the outside of the ...