See also:

Clearing the programmed information
Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

Headlight beam select
1 To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 2 Pull the lever back to select the low beam. 3 Pulling and releasing the lev ...

Checking engine coolant level
Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level B , add coolant to the MAX level A . If the reservoir is empty, check the coolant le ...