Headlight control switch

Type A
Type A

Lighting

1 When turning the switch to the the front parking, tail, license plate and position, the front parking, tail, license plate and instrument panel lights come on.

2 When turning the switch to the the headlights come on and all the other position, the headlights come on and all the other lights remain on.

Type B
Type B

Use the headlights with the engine running

Use the headlights with the engine running to avoid discharging the vehicle battery.

Headlight beam select

Headlight beam select

1 To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. light illuminates.

2 Pull the lever back to select the low beam.

3 Pulling and releasing the lever flashes the headlight high beams on and off.

Battery saver system

If the ignition switch is placed in the OFF position while the headlight switch is in the or or position, the headlights will turn off after position, the headlights will turn off after 5 minutes.

   

Even though the battery saver feature automatically turns off the headlights after a period of time, you should turn the headlight switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.

    See also:

    Gasoline specifications
    NISSAN recommends using gasoline that meets the World-Wide Fuel Charter (WWFC) specifications where it is available. Many of the automobile manufacturers developed this specification to improv ...

    Overdrive (O/D) OFF switch
    Overdrive (O/D) OFF switch When the O/D OFF switch is pushed with the shift selector in the D (Drive) position, the light in the instrument panel illuminates. See “Overdrive off indicator ...

    Reprogramming a single HomeLink button
    To reprogram a HomeLink Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink button. Do not release the button until step 4 has been completed. 2. When t ...