See also:

Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...

Ignition switch positions
LOCK: Normal parking position (0) ● Intelligent Key: ● PUSH OFF- The steering lock can only be locked at this position (for vehicles equipped with a steering lock mechanism). OFF: ( ...

Locking doors
Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...