Unlocking doors
Unlocking doors
Press the 
button on the keyfob once.
● Only the driver’s door unlocks.
● The hazard warning lights flash once if all doors are completely closed with the ignition switch in any position except the ON position.
● The interior light turns on and the light timer activates for 30 seconds when the switch is in the center O position with the ignition switch in any position except the ON position.
Press the button on the keyfob again
within 5 seconds.
● All doors unlock.
● The hazard warning lights flash once if all doors are completely closed.
The interior lights can be turned off without waiting 30 seconds by inserting the key into the ignition and turning it to the ON or START position, locking the doors with the keyfob or pushing the interior light switch to the OFF position.
See also:
Indicator lights
Continuously Variable Transmission (CVT)
position indicator light (CVT models)
When the ignition switch is placed in the ON
position, this indicator light shows the shift selector
position. ...
Reprogramming a single HomeLink button
To reprogram a HomeLink Universal Transceiver
button, complete the following.
1. Press and hold the desired HomeLink button.
Do not release the button until step 4
has been completed.
2. When the ...
Headlight beam select
1 To select the high beam function, push the
lever forward. The high beam lights come on
and the light illuminates.
2 Pull the lever back to select the low beam.
3 Pulling and releasing the lev ...