Silencing the horn beep feature
Silencing the horn beep feature
If desired, the horn beep feature can be deactivated using the keyfob.
To deactivate: Press and hold the
and 
buttons for at least 2 seconds.
The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated.
To activate: Press and hold the
and
buttons for at least 2 seconds
once more.
The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated.
Deactivating the horn beep feature does not silence the horn if the alarm is triggered.
See also:
Dehumidified heating
This mode is used to heat and dehumidify the air.
1. Press the button to the OFF
position.
2. Press the air flow control
button.
3. Turn the fan control dial to the desired position.
4. Push ...
Console box
Upper half
Pull up on the drivers side latch to open the
upper half of the console box.
The upper half of the console box may be used for
storage of cellular phones. An access hole is
provid ...
Clearing the programmed information
Individual buttons cannot be cleared, however to
clear all programming, push and hold the two
outside buttons and release when the indicator
light begins to flash (in approximately 20
seconds) ...