Audible reminder and warning when the engine stops
When the P position selecting warning light
(
) in the
instrument panel blinks in red.
● Make sure the shift selector is in the P (Park) position.
When the chime sounds intermittently.
● Make sure the shift selector is in the P (Park) position and the ignition switch is placed in the LOCK position.
If the chime sounds continuously when the driver’s door is opened, check the following.
● The shift selector is placed in the P (Park) position and the ignition switch is placed in the LOCK position.
● The mechanical key is not inserted into the ignition switch.
● The warning chime may stop when one of the following is performed.
– Returning the ignition switch to the LOCK position.
– Removing the mechanical key.
– Closing the doors.
See also:
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the call has ended, press the
button
on the steering wheel.
NOTE:
If you do not wish to take the call when you
...
Battery
If the battery is not fully charged during extremely
cold weather conditions, the battery fluid may
freeze and damage the battery. To maintain maximum
efficiency, the battery should be checked
...
Most common factors contributing to vehicle corrosion
-The accumulation of moisture-retaining dirt
and debris in body panel sections, cavities,
and other areas.
- Damage to paint and other protective coatings
caused by gravel and stone chips or
...
