Ventilation

This mode directs outside air to the side and center vents.

1. Push the 2. Turn the air flow control dial to the button to the off position.

2. Turn the air flow control dial to the position. position.

3. Turn the fan control dial to the desired position.

4. Turn the temperature control dial to the desired position.

    See also:

    LATCH lower anchor location
    LATCH lower anchor location The LATCH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH anchors. ...

    Installing front license plate
    Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

    Owner’s Manual/Service Manual order information
    A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. Filled with wiring diagrams, illustrations and step-by-step diagnostic and adjustment procedur ...