Dehumidified defogging
This mode is used to defog the windows and dehumidify the air.
1. Turn the air flow control dial to the
position.
2. Turn the fan control dial to the desired position.
3. Push the button. The indicator light comes on.
When the
or
position is selected,
the air conditioner automatically turns on (however,
the indicator light will not illuminate). In this
position, the A/C cannot be turned off. When the
air flow control is turned to any position other
than
or
the A/C light will illuminate
(the A/C will continue operating) and can be
turned off using the A/C button. This dehumidifies
the air which helps defog the windshield.
The
mode
automatically turns off, allowing
outside air to be drawn into the passenger compartment
to further improve the defogging performance.
4. Turn the temperature control dial to the desired position.
See also:
Zone variation change procedure
Zone map
The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass readings.
Foll ...
Driving Impressions
The Pathfinder performs capably on the highway and in the wilderness. It's
quiet while cruising and emits a slight truck-type drone. Its engine snarls a
bit during hard acceleration.
A four-whee ...
Control panel buttons — color screen with Navigation System (if so equipped)
Control panel buttons — color screen with Navigation System (if so equipped)
1. (brightness control) button
2. Display screen
3. MAP button*
4. NAV button*
5. TRAF button*
6. SETUP but ...
