Making a call by entering a phone number
1. Press the 
button on the steering
wheel. A tone will sound.
2. Say: “Call” A . The system acknowledges the command and announces the next set of available commands.
Say: “Special Dialing” to dial more than 10 digits or any special characters.
3. Say “Phone Number” B . The system acknowledges the command and announces the next set of available commands.
4. Say the number you wish to call starting with the area code in single digit format C . If the system has trouble recognizing the correct phone number, try entering the number in the following groups: 3-digit area code, 3-digit prefix and the last 4-digits. For example, 555-121-3354 can be said as “five five five” as the 1st group, then “one two one” as the 2nd group, and “three three five four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Dialing”. See “How to say numbers” in this section for more information.
5. When you have finished speaking the phone number, the system repeats it back and announces the available commands.
6. Say: “Dial” D . The system acknowledges the command and makes the call.
For additional command options, see “List of voice commands” in this section.
See also:
Rear window and outside mirror (if so equipped) defroster switch
Type A
To defrost the rear window glass and outside
mirrors (if so equipped), start the engine and
push the rear window defroster switch on. The
rear window defroster indicator light on the
...
Reprogramming a single HomeLink button
To reprogram a HomeLink Universal Transceiver
button, complete the following.
1. Press and hold the desired HomeLink button.
Do not release the button until step 4
has been completed.
2. When t ...
Clutch fluid (if so equipped)
Check the clutch fluid level in the reservoir
(manual transmissions only). If the fluid level is
below the MIN line, add Genuine NISSAN Super
Heavy Duty Brake Fluid or equivalent DOT 3 fluid
up ...