Stopping the vehicle

1. Safely move the vehicle off the road and away from traffic.

2. Turn on the hazard warning flashers.

3. Park on a level surface and apply the parking brake. Shift the manual transmission into R (Reverse), or the CVT into P (Park).

4. Turn off the engine.

5. Raise the hood to warn other traffic and to signal professional road assistance personnel that you need assistance.

6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle.

● Make sure the parking brake is securely

● Make sure the parking brake is securely applied and the manual transmission is shifted into R (Reverse), or the CVT is shifted into P (Park).

● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous.

● Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance.

    See also:

    Engine
    This spark ignition system complies with the Canadian standard ICES-002. ...

    IC Regulatory information
    - Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause unde ...

    Trunk divider (if so equipped)
    The trunk divider does not contain any secure locking mechanisms so it should not be used as a secure storage for valuables. The trunk divider allows for the creation of a hidden storage ...