Towing recommended by NISSAN
NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
A (CVT) Continuously Variable Transmission<> B (M/T) Manual transmission
● Never tow Continuously Variable Transmission (CVT) models with the front wheels on the ground or four wheels on the ground (forward or backward), as this may cause serious and expensive damage to the transmission. If it is necessary to tow the vehicle with the rear wheels raised always use towing dollies under the front wheels.
● When towing Continuously Variable Transmission (CVT) models with the front wheels on towing dollies, or when towing manual transmission (M/T) models with the front wheels on the ground.
– Turn the ignition switch to the OFF position, and secure the steering wheel in a straight-ahead position with a rope or similar device. Never secure the steering wheel by turning the ignition switch to the LOCK position.
This may damage the steering lock mechanism (for models equipped with steering lock mechanism).
– Move the shift selector to the N (Neutral) position.
● When towing Continuously Variable Transmission (CVT) or manual transmission (M/T) models with the rear wheels on the ground (if you do not use towing dollies): Always release the parking brake.
● Observe the following restricted towing speeds and distances for manual transmission (M/T) models only.
– Speed: Below 50 MPH (80 km/h) – Distance: Less than 50 miles (80 km)
See also:
RearView Monitor (if so equipped)
When the shift selector is shifted into the R
(Reverse) position, the monitor display shows the
view to the rear of the vehicle.
The system is designed as an aid to the driver in
detecting larg ...
Making a call
To make a call, follow the procedure below:
1. Press the button on the
steering
wheel. The “Phone” screen will appear on
the display.
2. Select one of the following options to make a
call: ...
Push-button ignition switch positions
LOCK (Normal parking position):
The ignition switch can only be locked in this
position.
The ignition switch will be unlocked when it is
pushed to the ACC position while carrying the
Intelligent ...