See also:

Cooling
This mode is used to cool and dehumidify the air. 1. Push the button to the off position. 2. Turn the air flow control dial to the MAX A/C or position. 3. Turn the fan control dial to the desi ...

Programming HomeLink
1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light (1) blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand ...

Headlight beam select
1 To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 2 Pull the lever back to select the low beam. 3 Pulling and releasing the lev ...