Cleaning

If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield.

Clean the outside of the windshield with a washer fluid or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water.

Clean each blade by wiping it with a cloth soaked in a washer fluid or a mild detergent. Then rinse the blades with clear water. If your windshield is still not clear after cleaning the blades and using the wiper, install new windshield wiper blades.

Worn windshield wiper blades can damage

Worn windshield wiper blades can damage the windshield and impair driver vision.

    See also:

    Locking with power door lock switch
    To lock all the doors without a key, push the door lock switch (drivers or front passengers side) to the lock position (1) . When locking the door this way, be certain not to leave the key ins ...

    DOOR position
    When the switch is in the DOOR position 2 , the ceiling light will illuminate under the following conditions: - ignition switch is turned to the LOCK position — remain on for about 15 seco ...

    Suggested maximum speed in each gear
    Downshift to a lower gear if the engine is not running smoothly, or if you need to accelerate. Do not exceed the maximum suggested speed (shown below) in any gear. For level road driving, use t ...