Hitch ball

Choose a hitch ball of the proper size and weight rating for your trailer.

● The required hitch ball size is stamped on most trailer couplers. Most hitch balls also have the size printed on the top of the ball.

● Choose the proper class hitch ball based on the trailer weight.

● The diameter of the threaded shank of the hitch ball must be matched to the ball mount hole diameter. The hitch ball shank should be no more than 1/16” smaller than the hole in the ball mount.

● The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut.

    See also:

    Heated seats (if so equipped)
    The front seats are warmed by built-in heaters. The switch is located on the center console. 1. Start the engine. 2. Push the LO or HI position of the switch, as desired. The indicator light in ...

    Drive belt
    MR20DE model 1. Automatic tensioner 2. Generator 3. Water pump 4. Air conditioner compressor (with A/C) or Idler pulley (without A/C) 5. Crankshaft pulley QR25DE model 1. Crankshaft p ...

    Rocking a stuck vehicle
    If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1. Turn off the Vehicle Dynamic Control (VDC) system. 2. Make sure the area in front and behind the vehicle is ...