Instrument brightness control

The instrument brightness control operates

The instrument brightness control operates when the headlight switch is in the position. or position. position.

Turn the control A to adjust the brightness of the meter panel and the instrument panel lights.

The brightness indicator B will be shown briefly in the vehicle information display when the control is turned.

When the brightness level reaches the maximum or minimum, a beep will sound.

When the brightness level reaches the minimum, the meter panel and the instrument panel lights will be turned off.

After the ignition switch is turned to the OFF position, the brightness indicator B is displayed for 30 seconds.

    See also:

    How to use the remote keyless entry function
    The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key. The remote keyless function can operate at a distance of 33 ft (10 m) away ...

    Using panic alarm
    If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button 3 on the keyfob for more than 1 second. 2. The theft warn ...

    Getting started
    The following procedures will help you get started using the Bluetooth Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to List of voice commands in ...