Locking with key
Locking with key
The power door lock system allows you to lock or unlock all doors simultaneously.
- Turning the driver’s door key cylinder to the front of the vehicle 1 will lock all doors and the lift gate.
- Turning the driver’s door key cylinder once to the rear of the vehicle 2 will unlock the driver’s door. After returning the key to the neutral position, turning it to the rear again within 5 seconds will unlock all doors and the lift gate.
See also:
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
Battery
If the battery is not fully charged during extremely
cold weather conditions, the battery fluid may
freeze and damage the battery. To maintain maximum
efficiency, the battery should be checked
...
Opening the fuel-filler door
Opening the fuel-filler door
To open the fuel-filler door, pull the left side of
the door. ...