Remote keyless entry system (if so equipped)

It is possible to lock/unlock all doors (including the lift gate), and activate the panic alarm by using the keyfob from outside the vehicle.

Before locking the doors, make sure the key is not left in the vehicle.

The keyfob can operate at a distance of approximately 33 ft (10 m) from the vehicle.

(The effective distance depends upon the conditions around the vehicle.) As many as 5 keyfobs can be used with one vehicle. For information concerning the purchase and use of additional keyfobs, contact a NISSAN dealer.

The keyfob will not function:
- When the keyfob is not within the operational range.

- When the doors are open or not closed securely.

- When the key is in the ignition switch.

- When the battery is discharged.

The remote keyless entry keyfob transmits

The remote keyless entry keyfob transmits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft navigation and communication systems. Do not operate the keyfob while on an airplane.

Make sure the buttons are not operated unintentionally when the unit is stored during a flight.

The following conditions or occurrences

The following conditions or occurrences will damage the keyfob.

- Do not allow the keyfob to become wet.

- Do not drop the keyfob.

- Do not strike the keyfob sharply against another object.

- If the outside temperature is below 148F (-108C) degrees, the battery of keyfob may not function properly.

- Do not place the keyfob for an extended period in an area where temperatures exceed 1408F (608C).

If a keyfob is lost or stolen, NISSAN recommends erasing the ID code of that keyfob. This will prevent the keyfob from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please contact a NISSAN dealer.

If the indicator light on the keyfob does not illuminate when pushing the buttons, the keyfob battery may be discharged.

For information regarding the replacement of a battery, see “Battery replacement” in the “8.

Maintenance and do-it-yourself” section.

See also:

Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...

SAFETY
The Murano CrossCabriolet has two sets of lower Latch anchors in the rear seats, but more importantly, the roomy backseat could easily house even the chunkiest infant carriers. With the top down ...

Making a call
To make a call, follow the procedure below: 1. Press the PHONE button on the instrument panel or the switch on the steering wheel. The Phone screen will appear on the display. 2. Select on ...