Unlocking doors

1. Push the UNLOCK the button 2 on the keyfob.

- The driver’s door unlocks.

- The hazard indicator flashes once if all doors are completely closed.

2. Push the UNLOCK within button again within 5 seconds.

- All the doors and the lift gate unlock.

- The hazard indicator flashes once if all doors are completely closed.

All doors will be locked automatically unless one of the following operations is performed within 1 minute of pushing the UNLOCK button. button.

- Any door or lift gate is opened.

- The ignition switch is turned to the ON position.

    See also:

    Locking doors
    Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...

    Maximum trailer loads
    Never allow the total trailer load to exceed the value specified in the “Towing Load/Specification” chart found later in this section. The total trailer load equals trailer weight plus its car ...

    Radio
    Place the ignition switch in the ACC or ON position and press the POWER/VOLUME control knob to turn the radio on. If you listen to the radio with the engine not running, the ignition switch sh ...