Under the Hood
A 3.5-liter V-6 engine sends 245 horsepower to Nissan’s Xtronic CVT, which has no gears but works with a steel belt and twin pulleys. An available Vehicle Dynamic Control system improves stability by controlling brake pressure and engine torque.
See also:
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
Brake and clutch (if so equipped) fluid
For further brake and clutch fluid specification
information, refer to “Capacities and recommended
fuel/lubricants” in the “Technical and
consumer information” section of this manual.
WARN ...
Heating
This mode is used to direct heated air to the foot
outlets. Some air also flows from the defrost
outlets and outboard vents.
1. Push the button to the off position for
normal heating.
2. Turn ...