Locking doors
1. Turn the ignition switch to the LOCK position.1
2. Carry the Intelligent Key with you.
3. Close all the doors.2
4. Push the door handle request switch (driver’s or front passenger’s) A or the
lift gate request switch B while carrying the Intelligent Key with you.3
5. All the doors and the lift gate will lock.
6. The hazard indicator flashes twice and the outside chime sounds twice.
1: Doors will lock with the request switch while the ignition switch is in the ACC or ON position.
2: Doors will not lock with the request switch while any door is open.
3: Doors will not lock with the request switch when the Intelligent Key is left inside the vehicle.
However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.
See also:
Folding rear seat (if so equipped)
Interior trunk access
For models without a rear center console, the
trunk can be accessed from the passenger side
of the rear seat for loading and unloading, as
shown.
(1) Push down on the bu ...
Fourth generation
The fourth generation Altima was announced at the 2006 New York Auto Show on
April 12, 2006. It is the first vehicle to use the smaller Nissan D platform,
with a new front and upgraded rear suspen ...
Tire labeling
Example
Federal law requires tire manufacturers to
place standardized information on the sidewall
of all tires. This information identifies
and describes the fundamental characteristics
of ...