Unlocking doors

1. Push the door handle request switch A or the lift gate request switch B while carrying the Intelligent Key with you.

2. The hazard indicator flashes once and outside chime sounds once. The corresponding door or the lift gate will unlock.

3. Push the request switch again within 5 seconds.

4. The hazard indicator flashes once and outside chime sounds once again. All the doors and the lift gate will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked.

- Opening any doors.

- Pushing the ignition switch.

- Inserting the mechanical key into the ignition switch.

During this 1-minute time period, if the UNLOCK pushed, all button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.

    See also:

    Opening and closing windows (if so equipped)
    The driver’s door key operation allows you to open and close windows equipped with automatic operation at the same time. ● To open the windows, turn the driver’s door key toward the rear ...

    Heater operation
    Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets. 1. Press the button to the OFF position for normal h ...

    Cargo net (if so equipped)
    Cargo net (if so equipped) ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause p ...