Locking doors

1. Turn the ignition switch to the LOCK position.1

2. Carry the Intelligent Key with you.

3. Close all the doors.2

4. Push the LOCK the button 1 on the Intelligent Key.

5. All the doors and the lift gate will lock.

6. The hazard indicator flashes twice and the horn chirps once.

1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position.

2: Doors will not lock with the Intelligent Key while any door is open.

Operate the door handles to confirm that the doors have been securely locked.

    See also:

    Manual command selection
    Commands can be selected manually. While the commands are displayed on the audio screen, select a command by operating the audio tuning switch, and then push the switch. Once a command is m ...

    Sonar system (if so equipped)
    - The sonar system is a convenience but it is not a substitute for proper parking. Always look around and check that it is safe to do so before parking. Always move slowly. - Read and u ...

    Clearing the programmed information
    Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...