Unlocking doors

1. Push the UNLOCK the button 2 on the Intelligent Key.

2. The hazard indicator flashes once. The driver’s door will unlock.

3. Push the UNLOCK within button again within 5 seconds.

4. The hazard indicator flashes once. All the doors and the lift gate will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the UNLOCK button button while the doors are locked.

- Opening any doors.

- Pushing the ignition switch.

- Inserting the mechanical key into the ignition switch.

During this 1-minute time period, if the UNLOCK button is pushed, all doors will be locked button is pushed, all doors will be locked automatically after another 1 minute.

    See also:

    Clearing the programmed information
    Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...

    Sway control device
    Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect trailer handling. Sway control devices may be used to help control these affects. If you choose to use one, contact ...

    RearView Monitor (if so equipped)
    When the shift selector is shifted into the R (Reverse) position, the monitor display shows a rearward view from the vehicle. ● The system is designed as an aid to the driver in detec ...