Using panic alarm

If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows:
1. Push the PANIC Intelligent Key for more than 1 second. button 3 on the Intelligent Key for more than 1 second.

2. The theft warning alarm and headlights will stay on for 25 seconds.

3. The panic alarm stops when:
- It has run for 25 seconds, or
- Any of the buttons on the Intelligent Key is pushed. (Note: PANIC button must be pushed for more than 1 second.)

    See also:

    Monitor, climate, audio, phone and voice recognition systems
    WARNING ● Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation. ...

    Installing front license plate
    Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

    Around viewTM monitor (if equipped)
    The CAMERA button is located on the center console. When you push the CAMERA button or shift the selector lever into the “R” (Reverse) position while the ignition switch is in the ON posi ...