Lift gate
- Always be sure the lift gate has been closed securely to prevent it from opening while driving.
- Do not drive with the lift gate open.
This could allow dangerous exhaust gases to be drawn into the vehicle.
See “Exhaust gas (carbon monoxide)” in the “5. Starting and driving” section of this manual.
- Make sure that all passengers have their hands, etc. inside the vehicle before closing the lift gate.
Lift gate
To open the lift gate, unlock it and push the opener switch A . Pull up the lift gate to open.
The lift gate can be unlocked by:
- pushing the unlock button 
on the
keyfob or the Intelligent Key (if so equipped)
twice.
- pushing the lift gate request switch (if so equipped).
- pushing the power door lock switch to the unlock position.
- inserting the key into the driver’s door key cylinder and turning it to the rear of the vehicle twice.
To close the lift gate, pull down until it securely locks.
See also:
To protect your vehicle from corrosion
- Wash and wax your vehicle often to keep the
vehicle clean.
- Always check for minor damage to the paint
and repair it as soon as possible.
- Keep drain holes at the bottom of the doors
open ...
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
Exterior changes
The revised models have been given a new look front and rear to differentiate
them from their predecessors. Changes at the front include a new bonnet, revised
grille and a new bumper assembly. Add ...