Fuel-filler cap

Fuel-filler cap
Fuel-filler cap

To remove the fuel-filler cap:
1. Turn the fuel-filler cap counterclockwise to remove.

2. Put the fuel-filler cap on the cap holder A while refueling.

To install the fuel-filler cap:
1. Insert the fuel-filler cap straight into the fuelfiller tube.

2. Turn the fuel-filler cap clockwise until a single click is heard.

- Gasoline is extremely flammable

- Gasoline is extremely flammable and highly explosive under certain conditions. You could be burned or seriously injured if it is misused or mishandled. Always stop engine and do not smoke or allow open flames or sparks near the vehicle when refueling.

- Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire.

- Use only an original equipment type fuel-filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system.

An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator light to come on.

- Never pour fuel into the throttle body to attempt to start your vehicle.

- Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers:
— Always place the container on the ground when filling.

— Do not use electronic devices when filling.

— Keep the pump nozzle in contact with the container while you are filling it.

— Use only approved portable fuel containers for flammable liquid.

- If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.

- Insert the cap straight into the fuelfiller tube, then tighten until the fuel-filler cap clicks. Failure to tighten the fuel-filler cap properly may cause the light (MIL) to illuminate. If the malfunction indicator light (MIL) to illuminate. If the light illuminates because the fuelfiller light illuminates because the fuelfiller cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The should turn off after a few driving light should turn off after a few driving trips. If the off after a few driving trips, have the light does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer.

For additional information, see “Malfunction Indicator Light (MIL)” in the “2. Instruments and controls” section.

- The LOOSE FUEL CAP warning will appear if the fuel-filler cap is not properly tightened. It may take a few driving trips for the message to be displayed. Failure to tighten the fuel-filler cap properly after the LOOSE FUEL CAP warning appears may cause the Malfunction Indicator Light (MIL) to illuminate.

    See also:

    Nissan says the Murano’s wraparound surface construction features a sloping hood line and a steeply raked windshield. Each wheel is pushed out toward the corners for a long wheelbase and wide st ...

    Maintenance requirement
    Your new NISSAN has been designed to have minimum maintenance requirements with long service intervals to save you both time and money. However, some day-to-day and regular maintenance is esse ...

    2010 Nissan Murano review
    You might think the second-generation Nissan Murano is not much different from the first because it has a strong visual connection, but once you're behind the wheel it's clear that the 2010 is mor ...