Automatic operation (AUTO)
The AUTO mode may be used all year around as the system automatically controls constant temperature, air flow distribution and fan speed.
To turn off the heater and air conditioner, turn the fan speed control dial to the OFF position.
Cooling and dehumidified heating:
1. Turn the air flow control dial and fan speed control dial to the AUTO position.
2. If the A/C indicator light does not illuminate, push the A/C button. (The A/C indicator light will illuminate.) 3. Turn the temperature control dial to set the desired temperature.
4. Press the outside air circulation /air recirculation button once to change operation of the air conditioner in the following order.
Air recirculation mode ?Outside air circulation mode
Heating (A/C off):
1. Turn the air flow control dial and fan speed control dial to the AUTO position.
2. If the A/C indicator light illuminates, push the A/C button. (The A/C indicator light will turn off.) 3. Turn the temperature control dial to set the desired temperature.
4. Press the outside air circulation /air recirculation button once to change operation of the air conditioner in the following order.
Air recirculation mode Outside air circulation mode Automatic control mode Air recirculation mode
When automatic control mode is set, the air recirculation indicator and outside air circulation indicator will turn off.
- Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled properly.
- If the windows fog up, use dehumidified heating instead of the A/C off heating.
Dehumidified defrosting/defogging:
1. Turn the fan speed control dial to the desired position.
2. Turn the air flow control dial to the position.
3. Turn the temperature control dial to set the desired temperature.
- To remove frost from the outside surface of the windshield quickly, set the temperature control dial and fan speed control dial to their maximum position.
- After the windshield is cleared, turn the air flow control dial to the AUTO position to set to the automatic mode.
- When the or position is selected, the air conditioner will automatically turn on when the outside air temperature is above 238F (−58C) to defog the windshield. The air recirculation mode will automatically turn off. The outside air circulation mode will be selected to improve the defogging performance.
See also:
Rear audio controls (if so equipped)
1. VOL (volume) control switch.
2. TUNE/TRACK switch.
3. ON/OFF button.
4. SRC (source) select button.
5. Display.
The audio system can also be operated using the
rear controls.
For informat ...
FM/AM/SAT radio operation
FM/AM band select:
Pressing the FM·AM button will change the band
as follows:
AM > FM1 > FM2 > AM
When the FM·AM button is pressed while the
ignition switch is in the ACC or ON position, the ...
Connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
1. Press the button on the ...