Before starting the engine

- Make sure the area around the vehicle is clear.

- Check fluid levels such as engine oil, coolant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you refuel.

- Check that all windows and lights are clean.

- Visually inspect tires for their appearance and condition. Also check tires for proper inflation.

- Lock all doors.

- Position seat and adjust head restraints.

- Adjust inside and outside mirrors.

- Fasten seat belts and ask all passengers to do likewise.

- Check the operation of warning lights when the ignition key is turned to the ON position.

(See “Warning/indicator lights and audible reminders” in the “2. Instruments and controls” section.)

    See also:

    Precautions on cruise control
    Precautions on cruise control 1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON/OFF switch ● If the cruise control system malfunctions, it cancels automatically. The SE ...

    Tongue load
    Keep the tongue load between 10 - 15 percent of the total trailer load or use the trailer tongue load specified by the trailer manufacturer. The tongue load must be within the maximum tongue load ...

    DOOR position
    When the switch is in the DOOR position 2 the map lights will illuminate under the following conditions: - ignition switch is turned to the LOCK position — remain on for about 15 seconds. ...