Precautions on cruise control
- If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle information display will then blink to warn the driver.
- If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.
- If the SET indicator on the vehicle information display blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer.
- The SET indicator on the vehicle information display may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET or CANCEL switch. To properly set the cruise control system, perform the following procedures.
Do not use the cruise control when
driving under the following conditions:
- when it is not possible to keep the
vehicle at a set speed
- in heavy traffic or in traffic that
varies in speed
- on winding or hilly roads
- on slippery roads (rain, snow, ice,
etc.)
- in very windy areas
Doing so could cause a loss of vehicle
control and result in an accident.
See also:
Indicators for operation
The design of the warnings and alerts may differ
depending on the model.
1. Door open warning
This warning appears if any of the doors are
open or not closed securely. The vehicle icon
indic ...
Trailer brakes
If your trailer is equipped with a braking system,
make sure it conforms to federal and/or local
regulations and that it is properly installed.
Never connect a trailer brake system directly
...
Wheels
Wash the wheels when washing the vehicle to
maintain their appearance.
- Clean the inner side of the wheels when the
wheel is changed or the underside of the
vehicle is washed.
- Inspect wheel ...