Break-in schedule

During the first 1,200 miles (2,000 km),

During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.

- Avoid driving for long periods at constant speed, either fast or slow. Do not run the engine over 4,000 rpm.

- Do not accelerate at full throttle in any gear.

- Avoid quick starts.

- Avoid hard braking as much as possible.

- Do not tow a trailer for the first 500 miles (800 km). Your engine, axle or other parts could be damaged.

    See also:

    Brightness button
    To change the display brightness, press the button. Pressing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the disp ...

    Using the brakes
    Avoid resting your foot on the brake pedal while driving. This will overheat the brakes, wear out the brake pads faster, and reduce gas mileage. To help reduce brake wear and to prevent the brakes ...

    Fail-safe
    If the vehicle is driven under extreme conditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. The MIL may come on to indicate the fail-saf ...